Read more at: https://phys.org/news/2017-03-soi-wafers-suitable-substrates-gallium.html#jCp
In cooperation with Okmetic Oy and the Polish ITME, researchers at Aalto University have studied the application of SOI (Silicon On Insulator) wafers, which are used as a platform for manufacturing different microelectronics components, as a substrate for producing gallium nitride crystals. The researchers compared the characteristics of gallium nitride (GaN) layers grown on SOI wafers to those grown on silicon substrates more commonly used for the process. In addition to high-performance silicon wafers, Okmetic also manufactures SOI wafers, in which a layer of silicon dioxide insulator is sandwiched between two silicon layers. The objective of the SOI technology is to improve the capacitive and insulating characteristics of the wafer.
"We used a standardised manufacturing process for comparing the wafer characteristics. GaN growth on SOI wafers produced a higher crystalline quality layer than on silicon wafers. In addition, the insulating layer in the SOI wafer improves breakdown characteristics, enabling the use of clearly higher voltages in power electronics. Similarly, in high frequency applications, the losses and crosstalk can be reduced," explains Jori Lemettinen, a doctoral candidate from the Department of Electronics and Nanoengineering.
"GaN based components are becoming more common in power electronics and radio applications. The performance of GaN based devices can be improved by using a SOI wafer as the substrate," adds Academy Research Fellow Sami Suihkonen.
SOI wafers reduce the challenges of crystal growth
The image on the right shows an electron microscope image with a cross-section of the manufactured layer structure. From top to bottom: compound semiconductor layers produced by MOVPE, device silicon layer, silicon dioxide insulator layer and handle silicon substrate used as the platform for the SOI wafer. Credit: Aalto University / Jori Lemettinen
Growth of GaN on a silicon substrate is challenging. GaN layers and devices can be grown on substrate material using metalorganic vapor phase epitaxy (MOVPE). When using silicon as a substrate the grown compound semiconductor materials have different coefficients of thermal expansion and lattice constants
than a silicon wafer. These differences in their characteristics limit the crystalline quality that can be
achieved and the maximum possible thickness of the produced layer.
'The research showed that the layered structure of an SOI wafer can act as a compliant substrate during gallium nitride layer growth and thus reduce defects and strain in the grown layers," Lemettinen notes.
GaN based components are commonly used in blue and white LEDs. In power electronics applications, GaN diodes and transistors, in particular, have received interest, for example in frequency converters or electric cars. It is believed that in radio applications, 5G network base stations will use GaN based power amplifiers in the future. In electronics applications, a GaN transistor offers low resistance and enables high frequencies and power densities.
More information: Jori Lemettinen et al. MOVPE growth of GaN on 6-inch SOI-substrates: effect of substrate parameters on layer quality and strain, Semiconductor Science and Technology (2017). DOI: 10.1088/1361-6641/aa5942
Journal reference: Semiconductor Science and Technology
Provided by: Aalto University
If you need more information about SiC substrate wafer, please visit our website:http://www.powerwaywafer.com/SiC-Substrate.html , send us email at email@example.com.
Post a Comment